Note: When printing on CR79 cards, make sure your layout is designed to the right specifications. Otherwise some information on the card may be cut off or misaligned compared to the layout on the computer.
Card Size Selection
Standard CR80 Card: Single Image sets the printer to print a single CR-80 sized image no matter the actual length of card
Extended Colour Card: Double Image" sets the printer to print on an extended length card. The Image Size parameter is the total length to be printed and is used by the firmware to determine how many lines of data are to be extracted from the second image (which is defined by the "Card Back" Tab) Image Size Range - 33.9mm to 55.1mm (1.334in to 2.169in)
Extended Monochrome: Extended Monochrome" sets the printer to print a monochrome only image on an extended length card. The Image Size parameter tells the firmware how many lines of data that should be used from the supplied image. Image Size Range - 33.9mm to 78.7mm (1.334in to 3.098in)
Number Of Copies
Default = 1
Controls the number of times the image is printed when you send a card design to the printer, for example if you set the number of copies to ‘5’ and send a single card design to print, the printer will produce 5 identical cards.
Printer Status
Shows the current settings and many statistics for the printer.